Owner's manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 19003002

3000lb Air Over Leaf Kit – 2.5” Leaf / Side Frame

Components:

2 90009000 Tapered sleeve air spring

2 90000061 2.5” leaf spring bracket

2 90000070 Air spring roll plate

2 90000002 Bolt-on upper bracket

2 31954201 ¼”npt x ¼” tube 90 degree air line fitting

Hardware:

6 99371001 3/8” x ¾” USS bolt Air spring mounts

8 99371004 3/8” x 1 ¼” USS bolt Upper bracket to frame

8 99372002 3/8” USS Nylok nut Air spring mounts

14 99373003 3/8” flat washer Air spring mounts

6 99373005 3/8” lock washers Air spring mounts

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 19003002 3000lb Air Over Leaf Kit – 2.5” Leaf / Side Frame Components: 2 90009000 Tapered sleeve air spring 2 90000061 2.
PAGE 2
REAR INSTALLATION SUPPLEMENT FOR MOUNTING AIRSPRING ON TOP OF LEAFSPRING 1. This installation is performed with the vehicle at ride height. When you raise the vehicle to a comfortable working height, support it by the axle housing. 2. Attach the lower airspring bracket to the top of the leafspring, preferably behind the rearend, using the attachment hardware provided. On some models, the lip of the airspring bracket will locate in the axle plate.
PAGE 3
Installation using 7000series or 9000 series airspring <<<<
PAGE 4
B air inlet A Double Convoluted Top Bottom Compressed Tapered Sleeve Rolling Sleeve Ride Height Extended Top Top Airspring Dimension Chart PART# TYPE 255C [F6957] 224C [F0335 26C [F7325] 20 [F6908] F9000 F9002 F9003 F9010 7012 7076 Double Convoluted Double Convoluted Double Convoluted Double Convoluted Tapered Sleeve Tapered Sleeve Tapered Sleeve Tapered Sleeve Rolling Sleeve Rolling Sleeve Capacity @100psi 2040# Ride Height 3150# Compres s Height 3” [built in bumpstop] 3” 5”-6” Max.