Instruction Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 19002005

2000lb Air Over Leaf Kit – 2” leaf / Under frame

Components:

2 90007076 Rolling sleeve air spring

2 90000074 2” leaf spring bracket

2 90000070 Air spring roll plate

2 9000033 Under frame bracket

2 31952201 1/8” npt x 1/4" tube 90 degree air line fitting

Hardware:

2 99752004 3/4" SAE jam nut Air spring to upper bracket

2 99371003 3/8” x 1” USS bolt Air spring to lower bracket

8 99371004 3/8” x 1 ¼” USS bolt Upper bracket to frame

8 99372002 3/8” USS Nylok nut Upper bracket to frame

10 99373003 3/8” flat washer Air spring mounting

2 99373005 3/8” lock washer Air spring to lower bracket

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.
PAGE 2
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com INSTRUCTIONS REAR INSTALLATION SUPPLEMENT FOR MOUNTING AIRSPRING ON TOP OF LEAFSPRING 1. This installation is performed with the vehicle at ride height. When you raise the vehicle to a comfortable working height, support it by the axle housing. 2. Attach the lower airspring bracket to the top of the leafspring, preferably behind the rearend, using the attachment hardware provided.
PAGE 3
Installation using 7000series or 9000 series airspring <<<<
PAGE 4
B air inlet A Double Convoluted Top Bottom Compressed Tapered Sleeve Rolling Sleeve Ride Height Extended Top Top AIRSPRING DIMENSION CHART PART# TYPE 255C [F6957] 224C [F0335 26C [F7325] 20 [F6908] F9000 F9002 F9003 F9010 7012 7076 Double Convoluted Double Convoluted Double Convoluted Double Convoluted Tapered Sleeve Tapered Sleeve Tapered Sleeve Tapered Sleeve Rolling Sleeve Rolling Sleeve Capacity @100psi 2040# Ride Height 3150# Compres s Height 3” [built in bumpstop] 3” 5”-6” Max.