User Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 12060600

61-69 Lincoln Front Black Series Shock Kit

For Use w/ CoolRide and Lower StrongArms

Components:

2 20000011 Shock absorber

2 90001619 Shock stud

2 90000471 Aluminum shock spacer

1 90000692 Driver side upper shock mount

1 90000693 Passenger side upper shock mount

Hardware:

8 99373007 3/8” x 1” self-tapping bolt Upper shock mount

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.
PAGE 2
1. Bolt the upper shock mount to the subframe using four 3/8” x 1” self tapping bolts. The bracket will locate off of the factory bolt shown in the picture. Drill the holes with a 5/16” bit. 2. The inner fender well must be trimmed to allow clearance for the shock mount. Be careful not to cut anything inside engine bay. 3. Remove the factory brake line bracket. This picture is of the passenger side. 4. Bolt the top of the shock to the upper mount using the bushings and hardware supplied. 5.