User guide

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 12010500

49-51 Mercury Black Series Front Shock Kit

For Use w/ CoolRide Kit

Components:

2 90000036 Lower shock brackets

2 90000011 Upper shock brackets - Tall

2 20000009 Shock absorbers – eye/eye

2 90001966 Shock sleeves

Hardware:

4 99501003 ½ x 2 ½ uss bolts shock bolts

4 99502001 ½ uss nyloc nuts shock bolts

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.
PAGE 2
1. Install the lower shock bracket to the rear leg of the lower control arm. One hole of the shock bracket will locate on the front rivet that attaches the coilspring plate to the control arm. The second attachment hole will need to be drilled. You will need to grind off the lip of the coilspring plate to get the shock bracket to sit flat on the control arm. 2. After the lower shock bracket is attached to the lower control arm, install the shock absorber and install the upper mount onto the shock.