Manual

ManualsBrandsRidetech ManualsCar11436799



350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part#11436799

73‐91GMC‐30Airbar



290002107 Airspring

1 90000937Panhardbar–TT17”(20.5”C‐C)

2 90001010 LowerBar–TW23”(25”C‐C)

2 90001006 UpperBar–TW17.375”(19.375”C‐C)

1 90000181 PanhardbarframebracketA169‐1

190000174 Driversideloweraxlebracket

190000175 Passengersideloweraxlebracket

2 90000171 UpperAxleBracket

1 90000226 Panhardbaraxlebracket

2 90000002 UpperAirspringmount

1 90000130 UpperBarFrameMount

1 90000131UpperBarFrameMount

2 90001589 KevlarlineHeimend–.75”threadx.625”I.D.A130‐1

1 99752004 ¾”SAEjamnut–installedonHeimend

8 90001085 Polybushinghalf–installedinbars&rodends

4 90000198 Innerbushingsleeve–installedinbars&rodends

2 90001082 ShortBumpstop

490001588Largerodend–1”thread

4 99952001 1”

SAEjamnut–installedonrodend

1 90001050 BoltKit



Fasteners



85/8x7”saeboltsAxleMountsA125‐2

85/8saeNylocnutsAxleMounts

165/8saeFlatwashersAxleMounts

75/8saeThinnylocjamnutBarends/panhardframemount

65/8x4.5”saeboltsBarendstobrackets

25/8x1.75saeboltsPanhardbartobracket

15/8Lockwasher

panhardbartobracket

4½x1”ussboltsLowerAirspring

4½lockwasherslowerairspring

87/16x1.5”ussboltsUpperbarframemount

A???

87/16NylocNutsUpperbarframemount

167/16ussFlatWashersUpperbarframemount

53/8x1”ussboltsPanhardbrackettoaxle



93/8lockwasherspanhardbrackettoaxle/upperairspringmountingA1064D‐1

93/8flatwasherspanhardbrackettoaxle/upperairspringmounting

43/8x¾uss boltsupperairspringmounting

11½x1‐1/4ussboltsUpperairspringmount/panhardbarframemount

11½nylocnutUpperairspringmount/panhardbarframemount

22½flatwashers

Upperairspringmount/panhardbarframemount



Summary of content (6 pages)

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11436799 73‐91 GM C‐30 Airbar 2 1 2 2 1 1 1 2 1 2 1 1 2 1 8 4 2 4 4 1 90002107 90000937 90001010 90001006 90000181 90000174 90000175 90000171 90000226 90000002 90000130 90000131 90001589 99752004 90001085 90000198 90001082 90001588 99952001 90001050 Air spring Panhard bar – TT 17” (20.5” C‐C) Lower Bar – TW 23” (25” C‐C) Upper Bar – TW 17.375” (19.
PAGE 2
1 2 Raise and support truck at a comfortable working height. Place jackstands under the frame ahead of the front leafspring hangar. Support the axle housing with another set of jackstands. Since you will be removing both leafsprings you will need to support the pinion yoke of the axle housing to prevent it from dropping when the leafsprings are removed. 2. (fig1) Remove the Factory overload bracket by drilling or grinding these 4 rivets. Repeat this step on both driver and passenger side. 3.
PAGE 3
4 5. (fig4) Now move to the axle bracket assembly. Using bracket (A125‐2 ) it sits on top of the axle using the pin to locate the bracket to the axle. The open end of the bracket faces toward the cab of the truck. The upper bar will be bolted here in another step. Repeat this step for both driver and passenger side. 5 6. Using the supplied hardware (5/8 x 7” sae bolts, washers and nyloc nuts) attach the lower axle bracket (A125‐3L & A125‐3R) shown in (Fig 5 & Fig 6).
PAGE 4
8 8. (fig8) Now Bolt the lower bar into the new axle bracket assembly installed in step 5. 9 9. (fig9) Now Bolt the upper bar into the new upper bar mount using the supplied 5/8x4.5”sae bolts, nuts, and washers. 10 10. (fig10) Now Bolt the upper bar into the Axle bracket assembly using the supplied 5/8x4.5”sae bolts, nuts, and washers. 11 11. (fig11) This bracket must be removed to install the upper airspring bracket to the frame, just drill the rivets out and remove.
PAGE 5
12 12. (fig12)Now the Panhard bar axle cover is ready to be installed, just unbolt the top 5 bolts from the rearend and replace with the supplied 3/8x1” bolts, washers and lock washers. 13 13. (fig13)use the pahard bar as a guide to locate the panhard frame mount these holes will also be used for the upper airspring mount. 14 15 14.
PAGE 6
16 16. (fig16) Mark the remaining holes to be drilled in the upper airspring and panhard frame mounts. 17 17. (fig17‐18) Now the airspring (F2107) can be bolted into the upper and lower mounts. Note. The lower bolt in the airspring may need to be loosened to orientate the holes in the bags and mounts. 18 18. Install fitting into airspring, make sure to use a sealing agent Teflon tape or paste is the best. Note. The fittings come with a anti seize on the threads, this will not seal the airspring.