User Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 11383699

99-06 Silverado Upper Strong Arms

Components:

2 90000630 Upper StrongArm

2 90000902 Ball joint (includes boot, grease fitting, castle nut & cotter pin)

8 90001086 Poly bushing half

4 90001097 Inner bushing sleeve

4 99250001 ¼”-28 grease fitting – Use Lithium grease on frame bushings

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.
PAGE 2
1. After removing the factory upper control arm, clean the bushing mounting surfaces on the frame and lubricate with lithium grease. 2. Drop ball joint down through upper arm. Install boot and fasten w/ the hardware supplied. 3. Bolt the arm to the frame using the factory camber bolts. Note: The truck must be realigned before driving. TOP 4. Push the stud through the spindle, secure w/ the new castle nut and cotter pin. A DRILL OUT HOLE WITH 1/2" DRILL BIT 5.
PAGE 3
Item # 1. 1. 2. 3. 4. 5. 6. 7. Description Passenger side arm Driver side arm Ball Joint Poly bushing half Inner bushing sleeve 5/16"-24 x 1” hex bolt 5/16"-24 nut 5/16” lock washer Qty.