Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 11382899

99-06 Silverado Front Lower StrongArms

For Use w/ Shockwave or CoilOver

Components:

1 90000106 Driver side lower arm

1 90000107 Passenger side lower arm

2 90000901 Lower ball joint (includes boot, grease fitting, castle nut & cotter pin)

2 90000198 3” inner bushing sleeve

2 90000199 3.5” inner bushing sleeve

8 90001085 Poly bushing half

2 90000921 90 degree 12mm PosiLink

2 90000922 Straight 12mm PosiLink

2 90000095 PosiLink T Bushing

2 90000096 PosiLink Spacer

4 90002062 Aluminum shock spacer

4 99250001 ¼”-28 grease fitting – Use Lithium grease on frame bushings

Hardware:

2 99122003 12mm x 1.75 x 60mm stud PosiLink (Use Loctite)

4 99122001 12mm x 1.75 Nylock nut PosiLink

6 99433002 7/16” SAE Gr.8 flat washer PosiLink

2 99501024 ½”-13 x 3” Gr. 5 bolt Shock to lower arm

2 99502001 ½”-13 Nylok nut Shock to lower arm

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11382899 99-06 Silverado Front Lower StrongArms For Use w/ Shockwave or CoilOver Components: 1 90000106 Driver side lower arm 1 90000107 Passenger side lower arm 2 90000901 Lower ball joint (includes boot, grease fitting, castle nut & cotter pin) 2 90000198 3” inner bushing sleeve 2 90000199 3.
PAGE 2
Installation Instructions 1. After removing the factory lower control arm, clean the bushing mounting surfaces on the frame and lubricate with Lithium grease. 2. Fasten the lower arm to the frame using the factory hardware. 3. Slide the ball joint boot over the stud, then push the stud down through the spindle. Secure w/ the new castle nut and cotter pin supplied. 4. Attach to the shock to the lower arm using the ½” x 3” bolt and aluminum spacers supplied. 5.
PAGE 3
99-06 Silverado CoolRide Driver Side StrongArm Item # 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Description Driver side arm Inner bushing sleeve – 3” Inner bushing sleeve – 3.5” Poly bushing half Aluminum shock spacer ½”-13 Nylok nut ½”-13 x 3” Gr. 5 bolt Ball joint 90 degree 12mm PosiLink Straight 12mm PosiLink PosiLink T Bushing PosiLink Spacer 12mm x 1.75 x 60mm stud 7/16” SAE Gr.8 flat washer 12mm x 1.5 Nylok nut Qty.