User Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 11380500

99-06 Silverado Front Black Series Shock Kit

For Use with CoolRide

Components:

2 20000011 Front shocks with hardware

1 90000378 Drivers side upper shock mount

1 90000379 Passenger side upper shock mount

2 90001617 .625” shock stud w/ hardware

Hardware:

2 99373007 3/8” x 1” self tapping bolt Shock mount to frame

8 99373003 3/8 USS flat washer Shock mount to frame

4 99372002 3/8” USS Nylok nut Shock mount to frame

4 99371003 3/8” x 1” USS bolt Shock mount to frame

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11380500 99-06 Silverado Front Black Series Shock Kit For Use with CoolRide Components: 2 20000011 Front shocks with hardware 1 90000378 Drivers side upper shock mount 1 90000379 Passenger side upper shock mount 2 90001617 .
PAGE 2
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Installation Instructions 1. The upper shock mount will bolt the rear upper control arm mounting bracket and to the side of the frame rail. It will use one existing hole in the control arm bracket. A 2nd 3/8” hole must be drilled in the control arm bracket. A 5/16” hole must be drilled into the frame rail for the 3/8” self tapping bolts. 2. Fasten the shock to the bracket using new bushings/hardware supplied. 3.