Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 11371499

88-98 C1500 Front Lower StrongArms

For Use w/ CoolRide

Components:

1 90000439 Driver side lower arm

1 90000440 Passenger side lower arm

2 90000897 Ball joints

8 90001085 Poly bushing half

2 90000198 Inner bushing sleeve – 3” long

1 90000199 Inner bushing sleeve – 3.5” long

1 9001092 Tube of Lithium grease

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11371499 88-98 C1500 Front Lower StrongArms For Use w/ CoolRide Components: 1 90000439 Driver side lower arm 1 90000440 Passenger side lower arm 2 90000897 Ball joints 8 90001085 Poly bushing half 2 90000198 Inner bushing sleeve – 3” long 1 90000199 Inner bushing sleeve – 3.
PAGE 2
Installation Instructions 1. After removing the factory lower control arm, clean the bushing mounting surfaces on the frame and lubricate with the lithium grease supplied. 2. Fasten the lower arm to the frame using the factory hardware. Note: On some trucks the frame brackets may be pinched and will need to be spread back apart to allow bushing to slide in. 3. Slide the ball joint boot over the stud, then push the stud up through the spindle. Secure w/ the new castle nut and cotter pin supplied. 4.
PAGE 3
88-98 C-1500 CoolRide Driver Side StrongArm Item # 1. 2. 3. 4. 5. 6. Description Driver side arm Ball joint Poly bushing half Inner bushing sleeve – 3” Inner bushing sleeve – 3.5” Grease fitting Qty.