User Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 11360600

73-87 C-10 Black Series Front Shock Kit

For use w/ Lower StrongArms

Components:

1 90000660 Driver side upper shock mount

1 90000661 Passenger side upper shock mount

2 90000471 Aluminum shock stud spacer

2 20000011 Shock absorbers

2 Hardware kit for 20000011

2 90001619 Lower shock studs

Hardware:

8 99371004 3/8” x 1 ¼” USS bolt Upper shock mount

8 99372002 3/8” USS Nylok nut Upper shock mount

16 99373003 3/8” SAE flat washer Upper shock mount

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.
PAGE 2
Installation Instructions 1. Place the new upper shock mount against the frame, the tab in the front of the bracket will slide into the factory shock stud hole. Position the bracket so that the bottom of the bracket is parallel to the bottom of the frame. Using the bracket as a template, mark an drill four 3/8” holes in the frame rail. Secure the bracket to the frame using four 3/8” x 1 ¼” bolts, Nylok nuts and flat washers. 2.