Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 11331099

63-87 Chevy C10 Front CoolRide Kit

For Use w/ Stock Lower Arms

Components:

2 90006873 Front air springs – 224C

2 90000060 Upper air spring plate

2 90000057 Lower air spring cup bracket

2 90001083 Medium bump stops – 1.5” tall

1 90000293 Driver side steering stop

1 90000294 Passenger side steering stop

Hardware Kit:

16 99372002 3/8” USS Nylok nut Air spring mounts

2 99371001 3/8” x 3/4” USS bolt Air spring to lower cup bracket

2 99373005 3/8” lock washer Air spring to lower cup bracket

4 99371003 3/8” x 1” USS bolt Steering stop to lower arm

8 99371004 3/8” x 1 ¼” USS bolt Upper mount to frame

30 99373003 3/8” SAE flat washer

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11331099 63-87 Chevy C10 Front CoolRide Kit For Use w/ Stock Lower Arms Components: 2 90006873 Front air springs – 224C 2 90000060 Upper air spring plate 2 90000057 Lower air spring cup bracket 2 90001083 Medium bump stops – 1.
PAGE 2
Installation Instructions ******Must be used w/ RideTech shock kit****** 1. Raise and support truck at a safe, comfortable working height. Let the front suspension hang freely. 2. Remove coil spring, shock absorber and bump stop. Refer to factory service manual for proper disassembly procedure. 3. Hold the upper plate to the cross member as shown in the picture to the left and clamp to frame. Using the plate as a template drill 4 holes in the cross member. 4.