User Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 11321499

78-88 GM “G” Body Lower Strong Arms

For Use w/ CoolRide

Components:

1 90000655 Driver side lower arm

1 90000656 Passenger side lower arm

2 90000896 Ball joint

2 90000573 Inner bushing sleeve

2 90000574 Inner bushing sleeve

4 90001085 Poly bushing half

4 90001089 Poly bushing half

4 99250001 ¼”-28 grease fitting – Use Lithium grease on frame bushings

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.
PAGE 2
Installation Instructions 1. After removing the factory lower control arm, clean the bushing mounting surfaces on the frame and lubricate with lithium grease. 2. Fasten the lower arm to the frame using the factory hardware. 3. Slide the ball joint boot over the stud, then push the stud down through the spindle. Secure w/ the new castle nut and cotter pin supplied. 4. Attach to the air spring & shock to the lower arm using the hardware supplied w/ those kits. 5.
PAGE 3
Driver Side Lower StrongArm Item # 1. 2. 3. 4. 5. 6. Description Driver side arm Ball Joint Inner bushing sleeve – wide Inner bushing sleeve – narrow Poly bushing half – wide Poly bushing half – narrow Qty.