Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 11222899

64-72 GM “A” Body Front Lower StrongArms

For Use w/ Shockwaves or CoilOvers

Components:

1 90000636 Driver side lower arm

1 90000637 Passenger side lower arm

2 90000898 Ball joint (includes boot, grease fitting, castle nut & cotter pin)

4 90000516 Inner bushing sleeve - .5” I.D. x .75” O.D. x 2.375” long

8 70010759 Delrin bushing half – 1.5” O.D.

4 90002062 Aluminum spacers – shock to lower arm

Hardware:

2 99501024 ½-13 x 3 ¼” Gr.5 bolt Shockwave to lower arm

4 99501005 ½”-13 x 3 ½” Gr. 5 bolt Lower arm to frame

6 99502001 ½”-13 Nylok nut Shockwave to lower arm / Lower arm to frame

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11222899 64-72 GM “A” Body Front Lower StrongArms For Use w/ Shockwaves or CoilOvers Components: 1 90000636 Driver side lower arm 1 90000637 Passenger side lower arm 2 90000898 Ball joint (includes boot, grease fitting, castle nut & cotter pin) 4 90000516 Inner bushing sleeve - .5” I.D. x .75” O.D. x 2.375” long 8 70010759 Delrin bushing half – 1.5” O.D.
PAGE 2
Installation Instructions 1. After removing the factory lower control arm, clean the bushing mounting surfaces on the frame and lubricate with lithium grease. 2. Fasten the lower arm to the frame with the ½” x 3 ½” bolts and Nylok nuts supplied. Note: On some cars the frame brackets may be pinched and will need to be spread back apart to allow bushing to slide in. 3.
PAGE 3
Item # 1. 1. 2. 3. 4. 5. 6. 7. 8. Description Passenger side arm Driver side arm Inner bushing sleeve Delrin bushing half Ball joint 1/2”-13 Nylok Nut 1/2”-13 x 3 ¼” bolt 1/2"-13 x 3 ½” bolt Aluminum bearing spacer Qty.