User Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 11169102

67-69 Camaro Rear MuscleBar

Components:

1 90001847 Sway bar assembly (3/4” Solid)

2 90001846 Sway bar arms

2 90001845 Axle mounting tabs

2 90001843 Poly bushing mounting bracket

2 90001979 Polyurethane bushing

4 90000926 10mm 90 degree PosiLink

2 90000114 3” PosiLink Spacer

1 90001092 Tube of Lithium Grease

2 99250001 ¼” – 28 Straight grease fitting

2 99115003 10mm x 115mm all thread In PosiLink

2 90002275 Crush washer In PosiLink

Hardware Kit: 99010045

4 99112002 10mm Nylok nut PosiLink

12 99373003 3/8” SAE flat washer PosiLink & bushing brackets

2 99371017 3/8” x 1” Button head Poly bushing bracket (Front)

2 99371016 3/8” x ½” Button head Poly bushing bracket (Rear)

4 99373005 3/8” lock washers Poly bushing bracket

6 99311006 5/16”-24 x 1 ¼” Gr. 8 bolt Arms to sway bar

6 99312001 5/16”-24 Nylok nut Arms to sway bar

12 99313001 5/16 SAE flat washer Arms to sway bar

PDF created with pdfFactory trial version www.pdffactory.com

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.
PAGE 2
11169102 Installation Instructions Note: This sway bar was designed for use with our AirBar 4 link system. Installation with other suspension systems will require modification. Newer AirBars will already have the mounting brackets welded to the cradle. If installing on an older system the mounting brackets (Part # 11169192) will need to be purchased and welded on. 1. Bolt the sway bar arms to the bar using three 5/16” x 1 ¼” bolts, Nylok nuts and flat washers per side.
PAGE 3
7. Swing the axle through full suspension travel checking sway bar clearance and ensuring that the PosiLinks do not bind. 8. Finish welding both sides of the axle tab to the tube with 1” welds, letting the weld cool between runs. Installation complete! PDF created with pdfFactory trial version www.pdffactory.