Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 11054499

58-64 Impala Rear Lower StrongArms

For Use with CoolRide

Components:

2 90000466 Lower control arm w/ air spring mount

4 90001085 Poly bushing half – 1.5” O.D x 1.5” long

4 90001086 Poly bushing half – 1.5” O.D. x 1” long

4 90000467 Bushing sleeve – 2.5” long

Hardware:

4 99621005 5/8” x 3 ½” SAE Gr.8 bolt Lower arm

4 99622006 5/8” SAE Nylok jam nut Lower arm

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11054499 58-64 Impala Rear Lower StrongArms For Use with CoolRide Components: 2 90000466 Lower control arm w/ air spring mount 4 90001085 Poly bushing half – 1.5” O.D x 1.5” long 4 90001086 Poly bushing half – 1.5” O.D. x 1” long 4 90000467 Bushing sleeve – 2.5” long Hardware: 4 99621005 5/8” x 3 ½” SAE Gr.
PAGE 2
Installation Instruction 1. Raise and support vehicle at a safe and comfortable working height. 2. Fasten the lower StrongArms to the frame and axle using the 5/8” x 3 ½” bolt and Nylok nuts supplied. 3. Thread the 3/8” x 3/4” bolt with washer and lock washer about half way into the air spring. Slide bolt into slot on lower arm and tighten. Note: Do one side at a time to keep axle from rotating.