Manual

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 11011499

55-57 Chevy Front Lower CoolRide StrongArms

Components:

1 90000559 Driver side lower StrongArm

1 90000560 Passenger side StrongArm

2 90000916 Ball joint (boots, grease fitting, castle nuts & cotter pins)

4 90000906 Lower control arm bushing

PAGE 1
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.
PAGE 2
Part # 11011499 Installation Instructions 1. Install the factory cross shaft on to the lower StrongArm using the factory hardware. Some grinding for clearance must be done on the cross shaft to enable it to slide it into the StrongArm. Note: There is a driver and passenger side cross shaft. Note: Tighten the bushing bolts w/ the car at ride height. 2. Install the ball joints in the lower arm pointing down. 3. Bolt the lower StrongArm to the car using the factory hardware.
PAGE 3
55-57 Chevy CoolRide Driver Side StrongArm Item # 1. 2. 3. 4. 5. Description Driver side arm Cross shaft bushing Ball joint 5/16”-24 x 3/4" bolt 5/16”-24 nut Qty.