Specifications

Pre-Ride Inspection
4. Check for Proper Rear View Mirror Installation & Adjustment
Your scooter has two mirrors right and left. Make sure that the mirrors are tightened
properly as not to easily sway or move. Mirrors assist the driver, it is always advisable,
and a safe driving practice, to confirm a lane change or turn by looking over your
shoulder for traffic
5. Proper Tire Inflation
Your Capri Scooter comes equipped with a 3-10 sized tire. Tire pressure gauges
are readily available at most automotive stores. Purchase one that easy to view
and read. Front pressure is 36 PSI, rear tire pressure should be set at 36 PSI.
ALWAYS DO a visual inspection for nicks, cuts or excessively worn treads prior to riding.
Inflating an Undamaged Flat Tire
On rare occasion your tires may arrive flat or go flat from temperature extremes. The 3-10 tires
that your Capri uses do not utilize an inner tube for inflation. The tires are tubeless and self sealing.
The trick is however, to get the tires to seat firmly on their rim If they are not seated they will not
inflate. There is a simple trick to follow. Grab a belt or a cinch strap. Wrap it tightly around the
center of the wheel as shown. Pull tightly so it squeezes the center of tire. This forces the tire side
walls to bulge out and seat firmly, simultaneously fill with air to 36 PSI.
Install or Adjust Rear View Mirrors
The m irrors require a 5/8” or 12mm wrench
to tighten and properly install and or adjust
each mirror.
Check tire pressure weekly. If your tire becomes completely flat you will need to compress the center of
the tire to reseat the seal. The process is fully explained in Inflating an Undamaged Tire.
Installing a mirror or adjusting
16