User manual

S9922 3G/4G Router User Manual
RICON: Mobile Connect Tecnology
To configure “IPSec” parameter, and then click “Save”.
Table 5-26 IPSec Parameter instruction
Parameter
Details
Operation
Basic Settings
Select
To select which phase of
IPSec, phase 1, phase 1 or
phase IPSec
Select “IPSec”.
Interface
Name
Name of this phase.
Input name.
Match
Phase1
To select a matching name of
“phase1”.
Select from DropDownList.
Match
Phase2
To select a matching name of
“phase2”.
Select from DropDownList.
Destination
IP or
Domain
counterpart IPSec server IP or
domain.
Input counterpart IPSec server IP or
domain.
Encryption
Interface
To select binding interface of
IPSec. to bind
VPDN/modem/br0 as local
interface of IPSec initial can
support IPSec OVER VPDN. In
addition, after binding, IPSec
rule will change as per the
charge of binded interface.
Thus can resume link of IPSec
dialing interface and keep
IPSec linked as soon as
possible.
Select from DropDownList.
---END