User manual

S9922 3G/4G Router User Manual
RICON: Mobile Connect Tecnology
Table 5-20 MASQ rule Parameter instruction
Parameter
Details
Operation
Select
To select “NAT” or “MASQ”
Select “MASQ”.
Interface
Interface includes:

br0: use br0 interface as
commucation address between
rouer & LAN and external network.

Modem: use modem interface as
commucation address between
rouer & LAN and external network.

modem2: use modem2 interface as
commucation address between
rouer & LAN and external network.

eth0: use eth0 interface as
commucation address between
rouer & LAN and external network.
Select from DropDownList
Step 5 Single click “save” icon to finish.
DMZ (demilitarized zone): when external address of NAT is “0.0.0.0/0”, and “Chain” is “dstnat” it
represents all packages sent to router will be forwarded to internal address of NAT. when external
address of NAT is “0.0.0.0, and “Chain” is “srcnat”. It represents the source address of all packages sent
from NAT internal address will be converted into interface address of router.
---END
5.5.3 Routing
Step 1 Log on WEB GUI of S9922 4G Router.
Step 2 Click “Forward > Routing” to open “Routing” tab.