User manual

S9922 3G/4G Router User Manual
RICON: Mobile Connect Tecnology
Parameter
Details
Operation
Source port
When choose “TCP” or
“UDP” “source port”
needs to be configured
for port of “TCP” or
“UDP”.
Value area: 1～65535
Replace address
To set IP address of LAN
PC of NAT forwarding.
e.g. 192.168.8.1
Replace port
When choose “TCP” or
“UDP” “Replace port”
needs to be configured
for port of “TCP” or
“UDP”.
Value area :1～65535
Step 5 Single click “save” icon to finish.
---END
MASQ rule configuration
MASQ is MASQUREADE
Step 1 Log on WEB GUI of S9922 4G Router.
Step 2 Click “Forward > NAT” to open “NAT” tab.
Step 3 Click “Add” and choose “MASQ”
Figure 5-32 MASQ configuration
Step 4 Configure MASQ rule parameter .