User manual

S9922 3G/4G Router User Manual
RICON: Mobile Connect Tecnology
Table 5-11 Timing task parameter instruction
Parameter
Details
Operation
Status
To enable or disable a timing
task. Some task shall be
enabled together with NTP.
options

Enable

Disable
Basic Config
Task name
Name of a timing task.
Max 12 digits.
Task type
Task type has action task and
status task. Action task is for
time point or time interval,
while status task is for time
period (for “modem-online”
and “modem2-online”),
which means that the
modem will be online (if
down, modem will
automatically redial) during
the configured time period.
Modem will be offline (no
dialing) for other time.
Drop DownList options:

modem-online

modem2-online

reboot

custom
if select “custom”, “schedule” will
be shown to input command (can
be diaup or other command). Max
64 bytes
Schedule
This is BGO command.
Usually suggested not to use
it. In case of need, pls
contact our technical
engineers.
WORD type. Max 64 digits.
Set time
Time type
Range or interval for status
task or action task.
DropDownList options:

range

interval
When “time type” select “range”
Clock
To input hour and minute.
When beginning and end
hour and minute are the
same, it means a time point
for action task.
Value area: [00:00,23:59]
Format: HH:mm-HH:mm
Day
Days in a month for task
Value area: [01,31]