User manual

S9922 3G/4G Router User Manual
RICON: Mobile Connect Tecnology
LED name
Status

Blinking quickly(2s): dialing

Dark：No module or no auto-dial
4.2 Local config
Precondition

Already power on S9922 LTE Router

Ethernet cable connect to S9922 LTE Router
You could specify a static IP or DHCP get IP for your computer.
Static IP
Step 1 Click “start > control panel”, find “Network Connections” icon and double click it to
enter, select “Local Area Connection” corresponding to the network card on this
page. Refer to the figure below.
Figure 4-1 Local Area Connection
Step 2 Obtain a IP address automatically, or follow below instruction.
S9922 Router default enabled DHCP server. If it has been disabled, DHCP cannot be use.