Operating instructions

32DDO05.A
1
-
4
D. PRODUCT TERMINOLOGY
The references used throughout this manual are illustrated in Figure 1-1 and defined in Table
1-1. Refer to Service Manual, Chapter IV, “Spare Parts” for more details.
TABLE 1-1: RDO2900 SERIES COMPONENT TERMINOLOGY
REF NAME DESCRIPTION
1 Right
2 Left
3 Front
4 Rear
Reference points from outside the vehicle looking inward.
5 Main plate Mounts the door operator assembly to the vehicle door.
6 Support plate Encloses component parts and mounts onto main plate.
7 Gear motor Electrically opens and closes the vehicle door.
8 Actuator am Connects hex-rod to motor assembly.
9 Hex-rod Connects actuator arm to clevis bracket.
10
Quick release
latch pin
Disconnects door operators in the event of power failure.
11 Clip-hitch pin Releases latch pin to operate door normally.
END OF TABLE
FIGURE 1
-
1: RDO2900
SERIES IN
TERNAL POWER DOOR OP
ER
A
TOR (FOR RIGHT DOOR)
TO NEXT CHAPTER
BACK TO TABLE OF CONTENTS