Operating instructions

32DDO05.A
1
-
1
I. INTRODUCTION
he RICON RDO2900 Series Internal Power Swing Door Operators electrically open and close
swing-type van doors. They have been designed to operate in most full size vans and pro-
vide up to 90° of motion for each door. The power door operators are installed within the doors.
Adjustable bell-cranks provide smooth operation, and a splined connection between the crank-
arm and the motor output shafts provide wobble-free operation.
The power door operators work with wheel-
chair lifts and ramps. As the lift or ramp is
deployed, or extended from the vehicle, the
power door operators automatically open
the vehicle doors. After the lift or ramp has
been used and is stowed and retracted into
the vehicle, the door operators automatically
close the vehicle doors. The power door
operators are installed onto two doors but
for safety reasons only one door is allowed
to operate at a time.
This manual contains operating and maintenance instructions for the power door operators. For
installation instructions, please refer to the service manual. It is important to user safety that the
installation is thorough and correct. Once the operators are installed, it is very important that
they be properly maintained by following the Ricon recommended cleaning, lubrication, and in-
spection instructions.
If there are questions about this manual, or additional copies are needed, please contact Ricon
Product Support at one of the following locations:
Ricon Corporation
7900 Nelson Road
Panorama City, CA 91402........................................................[phone]
Outside (818) Area Code .........................................................[phone]
World Wide Website.........................................................www.riconcorp.com
Ricon U.K. Ltd.
Littlemoss Business Park, Littlemoss Road
Droylsden, Manchester
United Kingdom, M43 7EF...............................................([phone]
A. RICON ONE-YEAR LIMITED WARRANTY (refer to following page)
T