Operating instructions

32DDO05.A
2
-
5
D. POWER DOOR OPERATION
WARNING!
IMPROPER USE OF THE DOOR OPERATORS CAN RESULT IN PERSONAL IN-
JURY. USERS MUST READ AND FOLLOW OPERATING INSTRUCTIONS IN
THIS MANUAL. ADDITIONAL COPIES OF THE OPERATOR MANUAL ARE
AVAILABLE FROM:
RICON CORPORATION
7900 NELSON ROAD
PANORAMA CITY, CA 91402
[phone] or [phone]
• PRIOR TO USE, INSPECT THE DOOR OPERATORS FOR PROPER FUNC-
TION, REQUIRED MAINTENANCE, OR DAMAGE. IF A PROBLEM EXISTS,
DO NOT USE AND CONTACT AN AUTHORIZED RICON SERVICE TECHNI-
CIAN FOR REPAIR.
RICON CORPORATION DISCLAIMS LIABILITY FOR DAMAGE OR PERSONAL
INJURY RESULTING FROM MODIFICATION TO THE DOOR OPERATORS, LACK
OF MAINTENANCE AND/OR REPAIR, NEGLIGENCE, ABUSE, OR FAILURE TO
FOLLOW OPERATING INSTRUCTIONS.
¡ Before operating the power door operators and lift or ramp, be certain vehicle is
safely parked on a level area away from traffic. Allow enough space for operation
and passenger boarding.
¡ Be certain vehicle safety interlock mechanism (e.g., emergency/power brake) is
properly engaged before attempting to operate the lift/ramp. The lift/ramp will not
operate until the safety interlock function has been engaged.
¡ Take special care to ensure the area is clear before deploying the lift/ramp.
WARNING!
ATTENDANT MUST REMAIN IN CLOSE PROXIMITY TO PASSENGER TO RENDER
IMMEDIATE ASSISTANCE, IF NECESSARY. KEEP OTHERS CLEAR WHEN OPER-
ATING LIFT. MAINTAIN PRESSURE ON SWITCH UNTIL FUNCTION IS COM-
PLETE. BE CERTAIN WHEELCHAIR FITS PROPERLY ON PLATFORM AND DOES
NOT CONTACT ROLLSTOP (PREVENTING IT FROM LOCKING AS THE PLATFORM
RISES OR LOWERS).
¡ If the vehicle is equipped with a dash-mounted, momentary toggle switch for the
door operators, maintain pressure on the switch in the appropriate direction until the
vehicle door is either fully closed or fully opened. Refer to the appropriate Ricon
Service/Owner manual and follow the operating instructions carefully.
¡ If the vehicle is not equipped with a dash-mounted, momentary toggle switch for the
door operators, follow the instructions below:
1. TO ENTER VEHICLE
a. OPEN DOORS/DEPLOY LIFT PLATFORM OR RAMP - Press and hold control
pendant DEPLOY/STOW switch in the DEPLOY position until the doors open
and the lift platform fully deploys and stops automatically at the vehicle floor
level or the ramp fully deploys.