Service manual

Bit Switches
M381 70 SM
Printer Switch 03 [SP No. 1-103-004]
No FUNCTION COMMENTS
0
Length reduction of received
data
0: Disabled
1: Enabled
0: Incoming pages are printed without length
reduction.
(Page separation threshold: Printer Switch 03, bits
4 to 7)
1: Incoming page length is reduced when printing.
(Maximum reducible length: Printer Switches 04,
bits 0 to 4)
1-3 Not used Do not change the settings
4-7
Page separation setting when
sub scan compression is
forbidden
00-0F (0-15 mm: Hex)
Default: 6 mm
Page separation threshold (with reduction
disabled with switch 03-0 above).
For example, if this setting is set to "10", and A4 is
the selected paper size:
If the received document is 10 mm or less longer
than A4, then the 10 mm are cut and only 1 page
prints.
If the received document is 10 mm longer than A4,
then the document is split into 2 pages.