Service manual

Bit Switches

SM 59 M381

Fax Option

Type SP5200

(M381)

4.3.2 I-FAX SWITCHES

I-fax Switch 00 [SP No. 1-102-001]

FUNCTION COMMENTS

Original Width of TX

Attachment File

This setting sets the maximum size of the original

that the destination can receive. (Bits 3~7 are

reserved for future use or not used.)

0 A4

0: Off (not selected), 1: On (selected)

If more than one of these three bits is set to "1",

the larger size has priority. For example, if both Bit

2 and Bit 1 are set to "1" then the maximum size is

"A3" (Bit 2).

1 B4

2 A3

3-6 Reserved

Not used

When mail is sent, there is no negotiation with the receiving machine at the

destination, so the sending machine cannot make a selection for the receiving

capabilities (original width setting) of the receiving machine. The original width

selected with this switch is used as the RX machine's original width setting, and the

original is reduced to this size before sending. The default is A4.

If the width selected with this switch is higher than the receiving machine can

accept, the machine detects this and this causes an error.