Service manual

Bit Switches
SM 53 M381
Fax Option
Type SP5200
(M381)
System Switch 15 [SP No. 1-101-022]
No FUNCTION COMMENTS
0
Not used
Do not change the settings.
1
Going into the Energy Saver
mode automatically
0: Enabled
1: Disabled
1: The machine will restart from the Energy Saver
mode quickly, because the +5V power supply is
active even in the Energy Saver mode.
The LED of the operation switch is flashing instead
of entering Energy Saver mode.
Use this setting if an external telephone has to be
used when the machine is in the Energy Saver
mode.
2-3
Not used
Do not change these settings.
4-5
Interval for preventing the
machine from entering Energy
Saver mode if there is a
pending transmission file.
Bit 5: 0, Bit 4: 0
1 min
Bit 5: 0, Bit 4: 1
30 min1
Bit 5: 1, Bit 4: 0
1 hour
Bit 5: 1, Bit 4: 1
24 hours
If there is a file waiting for transmission, the
machine does not go to Energy Saver mode
during the selected period.
After transmitting the file, if there is no file waiting
for transmission, the machine goes to the Energy
Saver mode.
6-7
Not used
Do not change