Service manual

Service Call Conditions
M052/M053/M054 6-30 SM
995 D CPM setting error
-001
 Defective BICU
Input the serial number with SP5811-004, and turn the main power switch
off/on.
-002
 Defective NVRAM on the controller
 Defective controller
1. Install a new NVRAM, and turn off and on the main power switch
after SC995-002 has occurred.
2. Reinstall the previous NVRAM or download the information with
SP5825-001, after that turn the main power off and on.
-003
 Incorrect type controller installed
 Defective controller
Replace the controller board with the correct type.
-004
 Incorrect model controller installed.
Replace the controller with the correct model.
997 B Application function selection error
Application selected by the operator did not start or end normally due to a
software problem. An option required by the application may not be
installed.
 Confirm which devices are required for the application.
 Make sure all devices are configured correctly.
 If the problem is with the fax unit, the nesting of the fax group may be
too complicated