Service manual

Service Call Conditions
M052/M053/M054 6-24 SM
860 B HDD error 1
The hard disk connection
is not detected because it
is defective or has not
been formatted
 Cable between HDC and HDD loose or
defective
 HDD power connector loose or defective
 HDD not formatted
 HDD defective
 Replace the controller board
861 B HDD error 2
The HDD did not enter
the ready status within 30
sec. after power on.
 Cable between HDC and HDD loose or
defective
 HDD power connector loose or defective
 HDD defective
 Replace the controller board
863 B HDD error 3
Startup without HD data lead. Data
stored on the hard disk is not read
correctly, due to a bad sector on the
HDD
 Format the HDD
 HDD defective
 Controller board defective
864 D
HDD error 4
 HDD defective
HD data CRC error. During operation
of the HD, the HD responded with a
CRC error.