Service manual

Using SP Modes
M052/M053/M054 5-206 SM
5.18 USING SP MODES
5.18.1 ADJUSTING REGISTRATION AND MAGNIFICATION
To adjust the registration and magnification, you need to use several service programs. The
chart shows an example of the procedure to adjust the machine in the basic configuration.
1. Output a pattern (SP5-902).
2. Adjust the sub-scan registration (SP1-001).
3. Adjust the main-scan registration of each paper tray (SP1-002).
4. Output a scanned image.
5. Adjust the main-scan magnification(SP2-112).
6. Adjust the sub-scan magnification(SP2-113).
7. Adjust the main-scan registration of the scanner (SP4-011).
8. Adjust the sub-scan registration of the scanner (SP4-010).
5.18.2 TEST PATTERN PRINT (SP 5902)
Executing Test Pattern Printing
1. Specify the pattern number and press the OK key.
2. Press the copy start key. The copy mode is activated
3. Specify copy settings and press the
key.
4. To return to the SP mode, press the
key.
Test Patterns
Test Patterns Using BICU
No. Pattern
0 (No print)
1 Vertical Line (1dot)
2 Vertical Line (2dot)
3 Horizontal Line (1dot)
4 Horizontal Line (2dot)
5 Grid Vertical Line