Service manual

Card Save Function
SM 5-203 M052/M053/M054
System
Maintenance
Reference
5.17.2 PROCEDURE
1. Turn the main power switch OFF.
2. Insert the SD card into slot 2. Then turn the power ON.
3. Enter SP mode.
4. Select the “Printer Sp”.
5. Select SP-1001 "Bit Switch” [A].
6. Select “Bit Switch 1 Settings” [B] and use the numeric keypad to turn bit 4 ON and then
press the “#” button to register the change. The result should look like: 00010000 [C]. By
doing this, Card Save option will appear in the “List/Test Print” menu.
7. Press “Exit” to exit SP Mode.
8. Press the “User Tools/Counter” button.