Service manual

System SP8-xxx
M052/M053/M054 5-124 SM
8 061
T:FIN Jobs *CTL
[0 to 9999999/ 0 / 1]
These SPs total the finishing methods. The finishing method is specified
by the application.
8 062
C:FIN Jobs *CTL
[0 to 9999999/ 0 / 1]
These SPs total finishing methods for copy jobs only. The finishing method
is specified by the application.
8 063
F:FIN Jobs *CTL
[0 to 9999999/ 0 / 1]
These SPs total finishing methods for fax jobs only. The finishing method
is specified by the application.
Note: Finishing features for fax jobs are not available at this time.
8 064
P:FIN Jobs *CTL
[0 to 9999999/ 0 / 1]
These SPs total finishing methods for print jobs only. The finishing method
is specified by the application.
8 065
S:FIN Jobs *CTL
[0 to 9999999/ 0 / 1]
These SPs total finishing methods for scan jobs only. The finishing method
is specified by the application.
Note: Finishing features for scan jobs are not available at this time.
8 066
L:FIN Jobs *CTL
[0 to 9999999/ 0 / 1]
These SPs total finishing methods for jobs output from within the
document server mode screen at the operation panel. The finishing
method is specified from the print window within document server mode.
8 067
O:FIN Jobs *CTL
[0 to 9999999/ 0 / 1]
These SPs total finishing methods for jobs executed by an external
application, over the network. The finishing method is specified by the
application.
8 06x 1 Sort
Number of jobs started in Sort mode. When a stored
copy job is set for Sort and then stored on the
document server, the L: counter increments. (See
SP8 066 1)
8 06x 2 Stack Number of jobs started out of Sort mode.