Service manual

System SP8-xxx
M052/M053/M054 5-120 SM
Abbreviation What it means
Svr Server
TonEnd Toner End
TonSave Toner Save
TXJob Send, Transmission
YMC Yellow, Magenta, Cyan
YMCK Yellow, Magenta, Cyan, Black
 All of the Group 8 SPs are reset with SP5 801 1 Memory All Clear.
8 001
T:Total Jobs *CTL
These SPs count the number of times each
application is used to do a job.
[0 to 9999999/ 0 / 1]
Note: The L: counter is the total number of times the
other applications are used to send a job to the
document server, plus the number of times a file
already on the document server is used.
8 002 C:Total Jobs *CTL
8 003 F:Total Jobs *CTL
8 004 P:Total Jobs *CTL
8 005 S:Total Jobs *CTL
8 006 L:Total Jobs *CTL
 These SPs reveal the number of times an application is used, not the number of pages
processed.
 When an application is opened for image input or output, this counts as one job.
 Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.
 Only jobs executed by the customer are counted. Jobs executed by the customer engineer
using the SP modes are not counted.
 When using secure printing (when a password is required to start the print job), the job is
counted at the time when either "Delete Data" or "Specify Output" is specified.
 A job is counted as a fax job when the job is stored for sending.
 When a fax is received to fax memory, the F: counter increments but the L: counter does
not (the document server is not used).
 A fax broadcast counts as one job for the F: counter (the fax destinations in the broadcast