Service manual

System SP6-xxx
M052/M053/M054 5-102 SM
5.7 SYSTEM SP6-XXX
5.7.1 SP6-XXX (PERIPHERALS)
6006 [ADF Adjustment]
Adjusts the side-to-side and leading registration of originals with the ARDF.
001 S to S Registration: 1st
*ENG
[-3.0 to 3.0 / 0 / 0.1 mm/step ]
002 S to S Registration: 2nd
003 Leading Edge Registration *ENG
[-5.0 to 5.0 / 0 / 0.1 mm/step ]
Adjusts the amount of paper buckle to correct original skew for the front and
rear sides.
006 Buckle: Duplex: 2nd *ENG
[-2.5 to 2.5 / 0 / 0.1 mm/step ]
Adjusts the erase margin at the original trailing edge.
007 Trailing Edge Erase *ENG
[-10 to 10 / 0 / 0.1 mm/step ]
6007
[ADF INPUT Check]
Displays the signals received from the sensors and switches of the ARDF. Only
Bit 0 is used for ADF input check (see "Input Check" in this section).
6008
[ADF OUTPUT Check]
Activates the electrical components for functional check.
It is not possible to activate more than one component at the same time (see
"Output Check" in this section).