Service manual

System SP5-xxx
M052/M053/M054 5-100 SM
5967 [Copy Server Set Function] *CTL
0: ON, 1: OFF
Enables and disables the document server. This is a security measure that
prevents image data from being left in the temporary area of the HDD. After
changing this setting, you must switch the main switch off and on to enable the
new setting.
5974
[Cherry Server]
Specifies which version of ScanRouter, “Lite” or “Full”, is installed.
001 Cherry Server *CTL
[0 or 1 / 0 / – ] 0: Lite, 1: Full
5985
[Device Setting]
The NIC and USB support features are built into the GW controller. Use this
SP to enable and disable these features. In order to use the NIC and USB
functions built into the controller board, these SP codes must be set to "1".
001 On Board NIC
[0 to 2 / 0 / 1 /step]
0: Disable, 1: Enable, 2: Function limitation
When the "Function limitation" is set, "On board
NIC" is limited only for the NRS or LDAP/NT
authentication.
 Other network applications than NRS or
LDAP/NT authentication are not available
when this SP is set to "2". Even though
you can change the initial settings of those
network applications, the settings do not
work.
002 On Board USB
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable