Service manual

System SP5-xxx
M052/M053/M054 5-98 SM
5894
[External Counter Setting] DFU
001 Switch Charge Mode *ENG
[0 to 2 / 0 / 1/step]
5902 [Test Print]
001 1 Sheet Test - -
Print the test pattern (selected with SP5902-003) a sheet of paper.
002 Cont Test OFF or ON - -
Print the test pattern (selected with SP5902-003) continuously until the "OFF"
button is pressed.
003 Test Pattern - -
Select a test pattern.
0. (No print)
1. Vertical Line (1dot)
2. Vertical Line (2dot)
3. Horizontal Line (1dot)
4. Horizontal Line (2dot)
5. Grid Vertical Line
6. Grid Horizontal Line
7. Grid Pattern Small
8. Grid Pattern Large
9. Argyle Pattern Small
10. Argyle Pattern Large
11. Independent Pattern (1dot)
12. Independent Pattern (2dot)
13. Independent Pattern (4dot)
14. Trimming Area
15. Hound’s Tooth Check (Vertical)
16. Hound’s Tooth Check (Horizontal)
17. Band (Horizontal)
18. Band (Vertical)
19. Checker Flag Pattern
20. Density Pattern
21. Full Dot Pattern
22. Full White Pattern
23. Grayscale Horizontal
24. Grayscale (Horizontal Margin)
25. Grayscale Vertical
26. Grayscale (Vertical Margin)
27. Grayscale
28. Grayscale (Margin)
29. Grayscale Grid
30. Grayscale (Grid Margin)