Service manual

System SP5-xxx
M052/M053/M054 5-70 SM
5824
[NV-RAM Data Upload]
Uploads the UP and SP mode data (except for counters and the serial
number) from the NVRAM to an SD card. For details, see the "NVRAM Data
Upload/Download" in the "System Maintenance Reference" of the Field
Service Manual.
001 - # -
5825
[NV-RAM Data Download]
Downloads the UP and SP mode data from an SD card to the NVRAM. For
details, see the "NVRAM Data Upload/Download" in the "System
Maintenance Reference" of the Field Service Manual.
001 - # -
5828 [Network Setting] *CTL
-
050
1284 Compatibility
(Centro)
Enables or disables 1284 Compatibility.
0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
052 ECP (Centro)
Enables or disables ECP Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
 This SP is activated only when SP5-828-50
is set to "1".
065 Job Spooling
Enables/disables Job Spooling.
[0 or 1 / 0 / 1 / step]
0: Disabled, 1: Enabled
066
Job Spooling Clear:
Start Time
Treatment of the job when a spooled job exists at
power on.
0: ON (Data is cleared)
1: OFF (Automatically printed)