Service manual

System SP5-xxx
SM 5-61 M052/M053/M054
System
Maintenance
Reference
18
The rescue certification of No. 17 has been recorded, and the GW URL
is being notified of the failure of the certification update.
068
CERT: Error
Displays a number code that describes the reason for the request for update
of the certification.
0 Normal. There is no request for certification update in progress.
1
Request for certification update in progress. The current certification
has expired.
2
An SSL error notification has been issued. Issued after the certification
has expired.
3
Notification of shift from a common authentication to an individual
certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
069 CERT: Up ID The ID of the request for certification.
083 Firmware Up Status Displays the status of the firmware update.
085 Firm Up User Check
This SP setting determines if the operator can
confirm the previous version of the firmware
before the firmware update execution. If the
option to confirm the previous version is selected,
a notification is sent to the system manager and
the firmware update is done with the firmware
files from the URL.
086 Firmware Size
Allows the service technician to confirm the size
of the firmware data files during the firmware
update execution.
087 CERT: Macro Version
Displays the macro version of the @Remote
certification.