Service manual

System SP5-xxx
SM 5-49 M052/M053/M054
System
Maintenance
Reference
5481
[Authentication Error Code]
These SP codes determine how the authentication failures are displayed.
001 System Log Disp *CTL
Determines whether an error code appears
in the system log after a user authentication
failure occurs.
[0 or 1/ 0 /1]
0: Off, 1: On
002 Panel Disp *CTL
Determines whether an error code appears
on the operation panel after a user
authentication failure occurs.
[0 or 1/ 1 /1]
1: On, 0: Off
5490 [MF KeyCard (Japan only)]
001 Job Permit Setting *CTL
Sets up operation of the machine with a
keycard.
[0 to 1 / 0 / 1]
0: Disabled. Cancels operation without a
user code.
1: Enabled. Allows operation without a user
code.
5501 [PM Alarm] *CTL -
001 PM Alarm Level
[0 to 9999 / 0 / 1 /step]
0: Alarm off
1 to 9999: Alarm goes off when Value (1 to 9999)
x 1000 > PM counter
002 Original Count Alarm
[0 or 1 / 0 / – ]
0: No alarm sounds
1: Alarm sounds after the number of originals
passing through the ARDF > 10,000