Service manual

System SP1-xxx
M052/M053/M054 5-10 SM
022 Tray4:Thick1 *ENG
023 Tray4:Thick2 *ENG
024 Tray4:Thick3 *ENG
025 Tray4:Thin *ENG
026 Duplex:Plain *ENG
[-70 to 70 / 0 / 0.1 mm/step]
027 Duplex:Thick1 *ENG
028 Duplex:Thick2 *ENG
1103 [PreRotate Temp] Fusing Pre-rotation Temperature
001
- *ENG
[0 to 180 / 150 / 1°C /step]
Specifies the temperature for the fusing pre-rotation.
1105 [Fusing Temperature] Fusing Temperature Adjustment
(Printing Mode, Paper Type, Simplex/Duplex)
001
Reload Temp *ENG
[100 to 180 / 135 / 1 deg/step]
Specifies the hot roller target temperature for the ready condition.
002
Stand-by Temp *ENG
[140 to 205 / 175 / 1 deg/step]
Specifies the hot roller target temperature for the standby condition.
010
Print:Plain *ENG
[150 to 215 / 200 / 1 deg/step]
Specifies the hot roller target temperature for the plain paper feeding condition.
011
Print:Thin * ENG
[150 to 215 / 170 / 1 deg/step]
Specifies the hot roller target temperature for the thin paper feeding condition.
012
Print:Thick * ENG
[150 to 215 / 195 / 1 deg/step]
Specifies the hot roller target temperature for the thick paper feeding condition.