Service manual

System SP1-xxx
M052/M053/M054 5-8 SM
017 Tray3:Thick1 *ENG
018 Tray3:Thick2 *ENG
019 Tray3:Thick3 *ENG
020 Tray3:Thin *ENG
021 Tray4:Plain *ENG
[–50 to 50 / 0 / 0.1 mm/step]
022 Tray4:Thick1 *ENG
023 Tray4:Thick2 *ENG
024 Tray4:Thick3 *ENG
025 Tray4:Thin *ENG
026 Duplex:Plain *ENG
[–50 to 50 / 0 / 0.1 mm/step]
027 Duplex:Thick1 *ENG
028 Duplex:Thick2 *ENG
1002
[Side-to-Side Registration]
Adjusts the side-to-side registration by changing the laser main scan start
position for each mode and tray.
Increasing a value: an image is moved to the rear edge of paper.
Decreasing a value: an image is moved to the front edge of paper.
001 By-pass *ENG
[–50 to 50 / 0.0 / 0.1 mm/step]
002 Tray 1 *ENG
003 Tray 2 *ENG
004 Tray 3 *ENG
005 Tray 4 *ENG
006 Duplex *ENG