Service manual

System SP1-xxx
SM 5-7 M052/M053/M054
System
Maintenance
Reference
5.2 SYSTEM SP1-XXX
5.2.1 SP1-XXX (FEED)
1001
[Leading Edge Registration] Leading Edge Registration Adjustment
(Tray Location, Paper Type), Paper Type -> Plain, Thick 1, Thick 2, Thick3 or
Thin
Adjusts the leading edge registration by changing the registration motor
operation timing for each mode.
Increasing a value: an image is moved to the trailing edge of paper.
Decreasing a value: an image is moved to the leading edge of paper.
001 By-pass:Plain *ENG
[–50 to 50 / 0 / 0.1 mm/step]
002 By-pass: Thick1 *ENG
003 By-pass: Thick2 *ENG
004 By-pass: Thick3 *ENG
005 By-pass: Thin *ENG
006 Tray1:Plain *ENG
[–50 to 50 / 0 / 0.1 mm/step]
007 Tray1:Thick1 *ENG
008 Tray1:Thick2 *ENG
009 Tray1:Thick3 *ENG
010 Tray1:Thin *ENG
011 Tray2:Plain *ENG
[–50 to 50 / 0 / 0.1 mm/step]
012 Tray2:Thick1 *ENG
013 Tray2:Thick2 *ENG
014 Tray2:Thick3 *ENG
015 Tray2:Thin *ENG
016 Tray3:Plain *ENG
[–50 to 50 / 0 / 0.1 mm/step]