Specifications

3. MOUNTING AND REMOVING THE LENS
1. Pull off the Back Lens Cap to remove it from the lens. (Fit
2. Pull off the Camera Body Cap. (Fig. 8)
3. Align the red dot on the camera with the red dot on the 1' and mount the lens
on the camera (Fig. 9)
4. Turn the lens in the direction shown by the arrow until it clicks into place.
(Fig. 10)
5. To remove the lens, depress Lens Release Button, then turn the lens in
the direction shown by the arrow. (Fig. 11)
* Conventional K mount lenses can be used in Aperture priority and
Manual Modes but cannot be used for Programmed AE Photography.
* For best results, use Ricoh original equipment lens. Proper performance
of camera may not always be assured with other lenses.