Specifications

1. ATTACHING THE STRAP
1. Remove the Battery Holder by turning the Battery Holder Screw counter
clockwise with a coin. (Fig. 1)
2. Slip the Viewfinder Cap on to the strap. (Fig. 2) Slip Cap over Viewfinder. (Fig.
3)
Adjust strap so that it extends about 25 cm (10 I) from Viewfinder.
3. Run the strap down through the Upper Strap Lug until it protrudes about 8 cm
(3") from the lug. Then feed the end through the Buckle. (Fig. 4.)
4. Remove Viewfinder Cap off camera, straighten out strap and attach other end
to Lower Lug in a similar manner.
4www.butkus.or g
5. Adjust the strap length as desired.
2. INSERTING BATTERIES
1. Insert four fresh batteries into the Battery Holder, first checking that the + and -
on each battery are lined up correctly according to the polarity diagram inside the
Battery Holder. (Fig. 5)
2. Secure the Battery Holder to the camera body by turning the Battery Holder
Screw clockwise with a coin. (Fig. 6)
Battery Choices:
* Four Penlight (AA/AAA) manganese batteries, alkaline batteries or nickel cadmium batteries.
(We recommend Alkaline batteries.)
* Condition of batteries should be monitored frequently. See Section 6 for details.