Specifications

33. FLASH PHOTOGRAPHY WITH SPEEDLITE PX PLUS 300P
When the subject for the flash photography is distant, use dual
flashes for extra power.
1. Attach both the Speedlite PX and 300P to the camera
according to their Instruction Manuals.
2. Set the camera for program AE photography. (i.e.
lens at P and shutter on AUTO) (Fig. 101)
3. Turn both flashes power switches on.4www.butkus.org
4. When both flashes are fully charged, the flash ready indicator blinks slowly.
5. Focus on the subject and press the Shutter Release Button.
34. FLASH PHOTOGRAPHY WITH NON-DEDICATED
FLASH UNITS (GENERAL INSTRUCTIONS)
1. Set the shutter speed to 1/60 sec. when a non-dedicated
flash unit is used. (Fig. 102) Note: Such units cannot be used
in auto mode. Set your F-stop according to the flash F-stop
dictated by the flash and ISO speed of the film you are using.
* If flash is not equipped with hot shoe connection, it cannot be
used.
* Dedicated flash units not designed for use with Ricoh
cameras may provide incorrect exposures and/or equipment
damage.
* The flash ready lamp does not light in the Viewfinder when a
non-dedicated flash is used.
* Refer to Operating Instructions for individual flash units for further specific details.