Specifications

* Reprogramming any default value may be done as follows:
a. Press and hold Reset Button. Then, ...
b. Use Up or Down Button to select manual shutter speed, TV, etc.
c. Also press and hold INT or + /- Button and use Up or Down Button to enter new time or
exposure adjustment.
d. Press C/S Button to select most used Film Advance Mode.
e. Release Reset Button to enter new default setting.
* Double, and Multiple Exposures my be made with the XR-M by pressing and holding both
the ISO and + / - Buttons at the same time. This disconnects the film transport system.
Now, the shutter may be released one or more times without advancing the film.
26. AE LOCK
When back light or spot light is given to the subject being metered in AE photography and contrast is
excessive between the background and the subject, under or over exposed pictures may result. Use the
AE lock to remember, or lock into the camera's electronic memory a close-up reading of the subject.4www.butkus.org
Example 1: When not using the AE lock
Example 2: When using the AE lock.
1. Bring the camera close to subject to the point that exposure will not
be affected by the background (or use the spot reading).
2. Press the AE Lock Button once to memorize the exposure. (Fig.
86)