Specifications

When the Speedlite PX is used on the camera, and the camera is set to
program AE photography, the shutter speed and F-stop are
automatically set.
Flash photography is a direct metering system and light is measured off
the film plane to control the flash duration. This makes possible a world
of special applications, as well as the ultimate in point and shoot
simplicity.
1. Carefully align the Guide Pin with the Guide Holder while inserting the
hook of the Speedlite PX into the holder of camera. Push the flash in the
direction of the arrow until it clicks into place. (Fig. 55)
2. Set the shutter speed to AUTO by using the Up or Down Button (or
the Reset Button). (Fig. 56)
3. Set the F-stop to P. (Fig. 57)
4. Set the Program Mode Selector to P. (Fig. 58) (See Section 31 for
additional details.)
5. Turn the Flash Power Switch on. This will also flip up the flash head.
(Fig. 59)
6. When fully charged, the Flash Ready Indicator ( ~ ) lights in the
Viewfinder and the Flash Ready Lamp on the back of the flash lights.
(Fig. 60)
7. Focus on your subject and press the Shutter Release Button to take
your picture automatically. (Fig. 61)