Specifications

4. Turn the lens in the arrow direction until it clicks into place. (Fig. 6)
* To remove the lens, turn the lens in the arrow direction
with the Lens Release Button depressed. (Fig. 7)
* The conventional K mount lens can be used as aperture-
priority and manual but cannot be used for programmed AE
photography.
* Proper performance of camera may not always be guaranteed with lenses other than Ricoh. For best results, use a
Ricoh original equipment lens.4www.butkus.org
SET LENS AT "P" POSITION
1. Turn the F-Stop Ring while P Lock But ton is pressed. (Fig. 8)
2. Set it to the locking "P" position as shown for programmed automatic exposure photography. (Fig. 9)
* To unlock "P", turn the F-Stop Ring while P Lock Button is depressed.
INSERT BATTERIES:
1. Slide the Battery Compartment Cover in the arrow direction
with your fingernail to open. (Fig. 10)
2. Place batteries in the battery compartment according to (+)
and (-) shown inside the battery compartment and close the
compartment cover. (Fig. 11 )