Specifications

* You may set shutter speed and f-stop number manually but shutter speed must be slower than 1/125 sec.,
however, when you select shutter speed faster than 1/125 sec.. the shutter speed is automatically set to 1/125 sec.
* Refer to Operating Instructions for flash units for further details.
FLASH PHOTOGRAPHY WITH "NON-DEDICATED" FLASH UNITS
(General use of flash)
1. Set the Shutter Speed Dial to 1/125 sec. when a generic flash unit is used.
Note: Such units cannot be used in A (Auto) mode.
2. Connect the synchro cord to the synchro socket if the flash is not equipped with a hot shoe connection.
* Avoid use of flash units other than RICOH with special contact pins, incorrect exposure or other problems may
result.
* The Flash Ready lamp does not light in the viewfinder if such a "non-dedicated" flash is used.
* Refer to operating instructions for these flash units for further details.
FLASH IN DAYLIGHT
The subject is affected by strong background light when taking pictures in back light. Dark pictures (faces, etc.)
may be produced. Well lit pictures can be obtained by using flash even in daylight. This is known as ''fill-flash".